CliniNet VR is an optional software platform designed specifically for clinicians, allowing them to view real time data of up to eight INSPIRATION^® ventilators at the same time from a single computer screen as shown below. This application provides a more user friendly product with quick viewing access of all ventilator settings, monitored parameters, active alarms, real time curves, trend data, device location, device ID, patient ID, network settings, diagnostic information, as well as eVent Medical contact and support information.

Use of CliniNet VR requires the software to be installed on a network-enabled computer. Additionally, the INSPIRATION ventilators must have the CliniNet Server interface installed and will need to be connected to the facilities network. The ventilators can be associated with the hospital network wirelessly or directly. After installation on a network-enabled computer, the software provides access to the ventilators connected to the network, Depending on network configuration, the ventilators can be accessed from anywhere in the hospital or the world if the clinician has access to the network from outside the hospital.

Try out the online CliniNet demo located on the MiniWeb server page or click here (access code: 1). For additional information, please review the product data sheets located on the main products page or contact our eVent Medical sales department at us.sales@event-medical.com or international.sales@event-medical.com.

• CliniNet Server interface board (PN: F910089)
• CliniNet Virtual Report Viewing System Installation Software (PN: F730736)
  -  Software includes 1 site license, 1 yr tech support  (call for more information)
• This product is designed for remote and centralized ventilator viewing but should not be used as a substitute for bedside patient assessment and care.
• CliniNet and Virtual Report are trademarks of eVent Medical
• To order CliniNet VR software or the CliniNet Server borad please contact the eVent Medical sales department. (Certain licensing restrictions apply.)

CliniNet Virtual Report User Interface

The CliniNet VR Viewing System software offers a security rich, interactive multi viewer user interface that allow up to eight INSPIRATION Ventilators to be viewed at the same time.

• Teaching

  Utilizing Virtual Report information brings the bedside to any location within the network. The challenge of teaching respiratory graphics monitoring becomes easier because you are now able to use real patient information. The concept of Virtual Report Respiratory Care rounds is now a reality.

Virtual Report Monitoring View

Each of the eight viewers shown below expands to allow full access to all ventilator data.

• Safety / Risk Management

  Much of the duties of Respiratory Care practitioners are to ensure settings match physician orders. The increased complexity of today’s mechanical ventilators has made finding discrepancies similar to finding a needle in a haystack. Subsequently, Respiratory Care practitioner’s daily activities focus less and less on patient care and more and more on preventing mistakes. Utilizing the Virtual Report information can significantly reduce this phenomenon. Being able to view all ventilator settings remotely and/or centrally in real time, (depending on network settings) Respiratory Care Practitioner can significantly improve patient care focus.

Virtual Report Selectable Expanded Viewer

The expanded viewer provides full (real time) access to all ventilator data.

• Protocol Management and Implementation

  As Respiratory Care continues to move towards protocol-based patient management, Virtual Report information can augment and provide the clinician with results-oriented information. All settings, trends, graphics and alarms can be analyzed during patient assessment rounds; again, away from the bedside continuously or at user-desired intervals.

Virtual Report User Application

Shift report, patient rounds, teaching, management review, service calls and troubleshooting in real time at centralized stations throughout the hospital or remotely around the world.

This is what Virtual Report is all about

• Isolation Patient Management

  The challenge of managing an isolation patient being mechanically ventilated can be difficult. Virtual Report remote viewing capabilities can reduce the number of times a clinician needs to visit the bedside.

Product Features

• Remote ventilator viewing via
    VLAN (ventilator local area network) Wireless or Direct
    Internet and / or intranet (through firewall)
• Real time viewing of multiple ventilators and patient data
• Easy integration of patient information
• Ventilator information management for quick access
• Three levels of user access
• Dual password protection
• Facility defined level of security and encryption

Taking patient care to a new level!

The Inspiration Ventilator’s optional CliniNet Server interface and CliniNet Virtual Report Viewing System bring centralized, real-time data and patient management to the entire care team. The intuitive user interface provides access to all your devices and allows you to view up to eight ventilators simultaneously on each computer monitor.

The CliniNet Server interface is designed to allow simple and complete integration with all your Inspiration ventilators.

Specifications

• Users must have network access
• Password required to access all installed devices
• Three levels of secure program access
    Admin, Supervisor and User
• Password required for database control
• Wireless adapters provide desired level of encryption and work in conjunction with hospital network security architecture

The user interface is divided by tabs for specific viewing areas

• Pressure + Time
• Flow + Time
• Volume + Time
• Pressure Volume Loop
• Flow Volume Loop
    User may pause and manually or auto scale individual graphs

The settings screen displays all of the ventilator’s settings and is divided into the following categories.

• Basic settings of the active mode
• Smart Sigh™
• Alarm settings
• Apnea backup settings
• Smart Sigh™ settings
• Smart Nebulizer™ settings

The trend screen allows the user to select, display and save trends for a specified period of time.

• Configurable recording time (1 - 36 hrs)
• Displaying waveforms and cursor select numerical values
• Provide trending data on 16 monitored parameters (additional service trends can be enabled)

  Ppeak		Resp rate
  PEEP		Leak rate
  Pmean		Cstat
  Pplateau		Rinsp
  Vte		Rexp
  Ve		Ti / Ttot
  Ve Spont		RR / Vt (RSBI)
  Tinsp (Ti)		Oxygen

• The alarm screen displays a list of all alarms viewable as separate high and medium priority alarms
• Provides real time viewing and visual alerts of alarm activity

• CliniNet Interface PCB (ventilator component)
    Ethernet 10 Base-T Full Duplex
    ARM9 Processor with
    Linux server
    Connector: RJ-45
    Dual USB ports for expandable memory and wireless integration
• Direct network interface with Ethernet cable
• Wireless interface via router or wireless bridge

• Ventilator operating temperature
    10 to 40o C (50 to 104o F)

• F910089

  CliniNet Server FRU

• F930166-IN

  CliniNet Virtual Report User Manual

• F730736

  CliniNet Virtual Report Viewing System Installation Software